Tag: fishing-tips

CUDA LAMPREY CUTTERS

           

Reviewed by: CAPT. MIKE SCHOONVELD

I only used this name because the first day I had the Cuda 5.25” Titanium Bonded Mini-Snips on the boat, the first thing they were used for was to decapitate a sea lamprey that came aboard on one of the fish we caught. Also, I called them lamprey cutters because the long name given this tool by Cuda seemed a bit cumbersome.

 When I first saw the cutters, using them to cut monofilament or fluorocarbon line didn’t pop into my head, either. What I thought of was that they’d make a perfect tool to snip the gills in the fish I planned to keep just after I caught them so the fish would bleed out as it died. Fish treated that way taste better in the long run, partly because they don’t have any blood coagulating in the meat and partly because the fish don’t have to be rinsed as thoroughly after being filleted. Bleeding the fish also makes clean-up at the fish cleaning station much easier.

 A pair of sturdy scissors is often the tool of choice for me and other anglers to cut through the gills but it takes a pretty hard squeeze to make the snip with most scissors. Notice how on the “lamprey cutters” the handles are large-hand-sized and the blades on cutters are relatively short. That delivers more power with less grip-strength needed. In use, (whether on the gills of a walleye, salmon or when beheading a lamprey) and easy squeeze does the job.

 They also do a perfect job of cutting mono and fluorocarbon line (and do a pretty good job cutting braid, as well.)  

 All the Cuda-brand tools I’ve ever used were well built and so are these. Cuda says the stainless steel parts of the tool are titanium bonded with zirconium blades. That means they are tough and sharp and will stay that way through many lamprey beheadings, gill clippings and years of cutting fishing line.  

 Cuda’s 5.25 Mini-Snips are widely available in retailers’ fishing tools sections, at online sellers or direct from Cuda at www.cudabrand.com.

RAPALA 50 LB. ANGLER MODEL SCALE

Reviewed by: CAPT. MIKE SCHOONVELD

Elsewhere in this magazine is an article about fishing scales, how they work, available models and how accurate they weigh fish. I gathered several scales to use, evaluate and test for this article and while none of them are perfect for every angler, for every fish or fishing condition, one thing did come out of my tests. I replaced the spring type, mechanical scale which had been on my boat for the past several years with the Rapala Angler Model acquired specifically for the feature story.

 I’d owned digital scales in the past and they worked well when the batteries were good. Too often, I’d pull the scale out to weigh a notable catch and found the Energizer Bunny had died. That’s why I switched to a good, mechanical model, but my tests for the feature showed my spring scale was “off” for the better part of a pound and the graduations that showed the weight were so close together that weighing to anything less than to the nearest pound was pure guesswork.

 The Rapala digital was spot-on for accuracy and was easy to read. I could have chosen one of the other digitals I tested, but several features guided my selection – most notably the scale operates on AA batteries – available anywhere. Try to find one of those square, 9Vs when you need it.

 Rapala says the two AAs will run the scale for 400 hours so expect a season’s use out of each pair. The circuitry automatically turns off the scale after a few minutes eliminating the possibility of accidentally leaving the scale in the on position from one trip to the next. Should the batteries run down, there is a back-up memory to store any weights you’ve entered and want to save.

 It will store up to eight different previously weighed fish – one for each person perhaps, or save the weights for different species as the season progresses. It will also total all the stored weights for an instant cumulative weight for tournament or other purposes.

 I don’t much use those features, but maybe I will. The kicker for me, however was instead of a simple hook to hold the fish being weighed, the scale comes with a rugged “vise-grip” style lip gripper which holds the fish securely and is less injurious to the fish being weighed.

 Rapala Touch Screen Angler Model scales are widely available at retail or online merchandizers or order them straight from Rapala at: www.rapala.com.