AFTCO REAPER CAMO SWEATSHIRT

Reviewed by Capt. Mike Schoonveld

When you think of a camo sweatshirt, I bet you think of a cotton or cotton/poly pullover with the logo of your favorite bow or firearm stitched across the front. Forget that when it comes to AFTCO’s Reaper line of hoodies and pullovers. Most important, the Reaper isn’t a cotton or cotton blend, which violates my ABC (Anything But Cotton) rule when it comes to picking fishing clothes. Cotton is comfy, but when I’m out fishing, something is likely to get wet. The weather is likely to be very warm or very cold and I don’t want to be wearing cotton garments in either extreme..

The Reaper Sweatshirt is made from a poly-microfleece material (whatever that is) – what I do know is it’s soft, warm and comfy. The exterior is a decidedly smooth tight weave finish with an inner fleece. That means it more windproof than a cotton sweatshirt and in my opinion, about 50% warmer but the poly material doesn’t absorb water/sweat like cotton would.

So far, it’s been my “outer” layer worn over a performance cloth shirt as my base layer for chilly fall mornings. Later in the fall and for winter work, it will become one of my middle layers over a heavier poly base layer and a heavier coat or parka on top. I’ve worn it on every trip in the ice-out and early spring fishing for Southern Lake Michigan coho as a mid-layer on cold mornings and as a top layer when the spring sun warmed things up midday.

I’m not a fan of “hunting camo” for fishing, though the Reaper Camos are available in a brown camo “Shadowgrass” pattern, green camo OG pattern and a gray/green, “Bottomland” hunting patterns. I am a fan of “fishing” camo patterns however because I’m a “messy” fisherman and by the end of a busy trip, I’ve got (pick one) mud, blood, grease or other dirt on my exterior clothes and the camos help disguise what would be a prominent dirty spot on a solid color garment. There are three dark, fishing/nautical patterns as well. I chose the Navy digital blue pattern. A side benefit is the poly-material is stain-release, so a regular trip through the washer, has it back to looking like new.

A couple of neat features is the built in face mask which is great when I’m speeding to a fishing hotspot on a cold morning. When it’s not in use, the facemask gives the garment a sort of turtle-neck like collar which makes it warmer all day. Anytime I’m wearing a hoodie, I inevitably end up with “stuff” squirreled away in the pouch-pocket on the belly of the shirt – cell phone, keys, spare change, small tools, etc. The Reaper’s pouch has small “hook and loop” tabs that makes the pouch a bit more secure.

The Reaper’s are available at retailers, at numerous online outlets including Amazon.com and of course at www.AFTCO.com.

RAPALA GOLD MINERS

Reviewed by: CAPT. MIKE SCHOONVELD

One of my most exciting finds at the 2024 ICAST show was at the Rapala booth when I spotted a new lure they call the Gold Miner. At first I thought it was another variation of the Rapala’s Deep Husky Jerk, Pradco’s deep diving Bandits and others of those types of lures, but then I noticed one thing that set them apart. The lip at the front of these lures are larger than most other deep divers and indeed they do dive deep. Like a miner digging deep to find gold nuggets or veins of ore, the Gold Miner easily dives to 30 feet to get down to walleye gold in Lake Erie and other deep lakes.

I was able to score some of the Gold Miners and put them to work during Lake Erie’s Fall Brawl in early November last year. The marks on our screen showed far more fish deeper than 30 feet than in the 20s. The only way to get our Bandits and other deep divers down to them was to go with the 50 + 2 method and even then we were putting out 100 feet of line after clipping on the Snap Weight.

Gold Miners haven’t yet been added to the Precision Trolling Data app, so we were deploying them the old fashioned way – trial and error. The first thing in the morning the Gold Miners started scoring with only 100 feet of line behind the planers. By mid-morning we were setting them back 120 and our final fish at high noon came on a chrome/blue Gold Miner set back 140 feet.

Check out the array of available colors at www.rapala.com. They will soon be available everywhere Rapala lures are sold (if they can keep them in stock.)

SCOTTY CELL PHONE HOLDER

A cell phone became a reality in my life at the same time I earned my first USCG Captain’s Credentials and I needed a way to contact my customers on the road or on my boat. My first phone models were flip phones or other thin-line models designed to slide into a pocket or just secure in the glove compartment. About the only thing I could do with it was call someone, if I could get a signal. Many of the places I fished had sketchy service once I was more than a mile or so from the marina.

That’s changed. From weather radar, to weather forecasts, to apps to contact the Coast Guard, BoatUS, my boat insurance company and other features, I need to have my phone front and center. A phone stuck in my pocket is no good, especially when I layer on and off outer garments depending on the weather changes during the day. A quick pat down when I need the phone reminds me it’s either buried three layers deep or it’s in the vest or sweatshirt I took off when the sun popped out.

In my car and truck I use cheap phone holders to keep the phone in easy view for general use, more so, when I have the mapping feature activated to guide me to new destinations. It took a couple of tries before I found one that would fit the space on my dashboard, that would stick where I wanted it to stick and one that wouldn’t fall off the next time I hit a bump.

Trying to find a phone holder that would work in my boat was even more taxing. The potential mounting locations were fewer. I have an open cockpit so areas out of the weather or spray are few. The first phone holder I tried on board snapped off as I slammed over a particularly big wave. The best bet was to stick the phone in the cup holder on the dashboard, except when it was holding my morning coffee or a bottle of water.

All’s well now that I have a phone holder kit from Scotty Products. I had a lot of faith in this product before I even got it out of the packaging. Scotty has been a pioneer in making fishing and boating gear (mostly from plastic) for over 70 years – good products that stand up to the use and abuse fishermen dole out both on the West Coast and on the Great Lakes.

The kit (#139) is just as tough and with more traditional suction cup mount or positioning arms that can integrate with their ball mounting system (often used for rod holders or electronics mounts) I found several options of where and how to mount the phone support. The mechanism that actually cradles the phone tightens with a wing-headed screw, not just a weak spring like car-models I tried. I haven’t hit a wave so far that moved the positioning supports or dropped the phone.

I was able to position the phone support between two other screens permanently mounted on my dash in what was previously just wasted space. I cleaned the fiberglass and the suction cup and pushed the little lever that forced down the suction disk creating the vacuum that holds it in place. It’s remained in place through wind, waves, heat and humidity. No duct tape needed.

If you want more info on this or other Scotty Products, go to www.scotty.com. They don’t sell direct from their website, but they do have a nationwide list of retailers shown on the website and Scotty Products are also available from numerous online sellers including Amazon.com

DUBRO TRAC-A-ROD FISHING ROD RACK

Reviewed by: CAPT. MIKE SCHOONVELD

I edit a column for Great Lakes Angler Magazine called Basics and Beyond in each issue. The B&B column features tips about fishing and gear hacks submitted by readers that they use to make their life easier. Few of these tips are more frequent than the ways GLA readers have devised to store their fishing rods back home, on their boat or in their vehicles. Most of these tips feature rod storage designs made from everyday items usually used elsewhere including PVC pipe, clothespins, pool noodles, milk crates, five gallon buckets and other supplies. There are many ways to produce innovative projects to safely and compactly store fishing rods and reels.

Face it, there are plenty of people that don’t have the time or tools to complete DIY projects. Some don’t have the skills. Luckily, there are plenty of commercially made rod racks or other storage solutions. These vary from flimsy racks that I’d never recommend to pricey racks that I’d never advise anyone to purchase.

One I’ve found that does pass my muster is the Trac-A-Rod system from Dubro. I call it a system because it comes in two-foot lengths which will hold six rod and reel combos so it’s easy to customize it to most any space you have available. If you have a large space available and lots of rods to store, they also come in four-foot lengths. I’ve put two of the four-footers to put on the pole barn wall where I store my boat.

When I say, “any space” it’s because the Trak a Rod systems will fit on ceilings, walls (either vertically or horizontal) and on any kind of surface. The actual hangers fit into an aluminum track so they are adjustable to fit combos of any size.

If they are going in a storage area, the color of the tracks or hangers isn’t an issue most of the time, but in a den, man-cave or more public area, choose from silver track/white holder, silver/black, black/black or my favorite (as a Purdue grad) the gold track/black holders. Trac-A-Rod Fishing Rod Racks are available direct from www.dubrofishing.com, at retail outlets and many online sources including Amazon.com.

BATTLEGLASS by LAMIGLAS

Reviewed by CAPT. MIKE SCHOONVELD

As the name implies, the Battleglass rods are made from fiberglass. What? Anglers have been trained, over the years, that fiberglass is “old fashioned” technology when it comes to fishing rods. Graphite, boron, carbon fiber are now the rage, right?

Saying fiberglass is “old fashioned” as a fishing rod component, is like saying wood is old fashioned for building houses or steel is old fashioned for building pick-up trucks. Most everything has evolved over the years and Lamiglas has been using fiberglass to make fishing rods for over 75 years and their ability to fashion fiberglass into fishing rods has certainly evolved.

The Battleglass rod I put to the test on my boat has proved to be one tough customer and perfect for how I’ve used it – and I’ve used it with planer boards, as a downrigger rod and with reels loaded with braid, monofilament and with leadcore. I selected the 8’ 2” model, a bit short than what I prefer for divers, but I think the 9-footer or the 10’ 6” rods in Battleglass line would work great with both regular and magnum divers.

The test rod is destined to be one of my planer board rods as it meshes nicely with the 8-footers currently on my boat for both salmon and walleye. If I were buying it as a ‘rigger rod, I’d have picked the 8’6” Battleglass. It’s lighter than some of my older fiberglass rods, both in the rod ahead of the reel and in the carbon-fiber handle both light, durable and handsome.

If you are looking for a mid-priced trolling rod that will give you decades of use, check out or purchase the Lamiglas Battleglass rods at http://www.lamiglas.com.

GILL VOYAGER DAY PACK

Reviewed by: CAPT. MIKE SCHOONVELD

I don’t leave some of the gear I use just about every trip on or in my boat between excursions. Things like clothes, raingear, sometimes footwear or gloves are removed and either laundered or at least allowed to dry thoroughly between trips. I learned long ago if I pulled out a jacket, hat, camera, or other gear stowed on board, it’s often not as “fresh” as when I stowed it in cubby or compartment.

Anytime I hop onboard someone else’s boat I know I’ll need to take along some of my personal gear. Whether it’s day trips on my boat or on someone else’s, I rely on a roomy day pack to keep my personal gear organized and dry. Last summer my Gill Voyager Day Pack was been my constant companion.

In the early season when days start out more wintery than spring-like, I shed layers as the day warms and when I do, I stuff my morning parka, bibs or other gear into the Day Pack just to keep it out of the way. In the summer, I always have rainsuit in the Day Pack and perhaps a spare sweatshirt along with a boonie hat to keep my ears shaded on sunny days. There may be some homemade cookies, a couple bottles of water or some new lures in the bag when I load it from my truck to the boat.

On away trips I stick my camera, batteries and often my wallet in the zipper-close inner pocket to keep things safe and organized. I bring my own Type V lifejacket, some ziplock baggies and my favorite fillet knife. All this and there’s still room for a couple of 3700 Stowaway lure boxes if I think the extra tackle would be helpful or appreciated.

It all fits – usually – the bag will hold 25 litres (almost seven gallons) worth of gear and I don’t worry about packing it overly tight. The Day Pack is made from a tough, seamless PVC tarpaulin fabric. If I don’t need that much space, I can just give the roll top closure an extra turn or two to shrink the bag and insure it stays perfectly waterproof. I just toss in the bow or stuff it under a seat and don’t worry about it until it’s needed.

It has sturdy, backpack-like carrying straps, handy when carrying it from the parking lot to the docks or even from the ticket counter to the gate in airports. The day pack makes a great carry on for air travel.

Want to try a Gill Day Pack or any other Gill fishing products for yourself? Great! Fishing Toys readers can score a 10% discount by using the Code: CAPTMIKE10 at check out when you purchase at www.gillfishing.com. They are also available at some retailers, at many online sellers and Amazon.com.